Rhude Multicolor T-Shirt Collection Review: A Boxy Tee Where the Shoulder Outruns the Chest

Rhude's multicolor T-shirt collection is not one tee. It is a single listing, SKU 7718845670, holding roughly 45 option codes — RH201 through RH240 — in black, white, apricot and combination prints, all priced at $8.36 against a $9.20 original. We ordered and tested it, taking a medium and a large in the RH236 black lettering print so we could compare one body against one spec sheet before handing down a size verdict.

The short version: the fabric hand and the print quality hold up well past the price, and the cut is where the risk sits. This is a wide-shouldered, mid-sleeve pullover whose hem is the stricter gate, not the chest.

What we ordered and what we put on the tape

We keep the parcel unopened until it is photographed, then weigh it. Our single medium arrived at 232 g including poly mailer, which puts the shirt itself inside the listing's stated 180–250g band with the mailer allowance removed. From there we measured flat: shoulder seam to shoulder seam, pit to pit, collar to hem, hem width, and sleeve length from shoulder seam to cuff.

Point of measure (medium, flat)	Our tape	Rhude's published M	Gap
Shoulder	56.5 cm	58 cm	1.5 cm under
Pit to pit	55 cm	58 cm	3 cm under
Collar to hem	69 cm	71 cm	2 cm under
Hem width	52 cm	Not published	—

Every gap sits inside the 1–3 cm tolerance the listing itself declares, so nothing here is out of spec. That is the point: the listing gives sizes S through XXL but no per-size chart, so buyers end up borrowing Rhude's brand chart to guess. Our measurements tracked that chart within tolerance, which is a useful sign that the option codes are cut from the pattern the listing describes as loose.

Why the shoulder number decides the size

The headline proportion on a Rhude-style tee is that shoulder and chest sit almost level — 58 cm shoulder against 58 cm pit to pit on a medium in the brand chart. On a standard tee, shoulder is usually several centimetres narrower than chest, which is why the drop shoulder here reads boxy even in boring lighting. It also means the shirt hangs from the shoulder line rather than draping from the chest, so the shoulder measurement is the one you should compare to a tee you already like.

"definitely get the size Large if not a medium. Rhude fits really big in t shirts." — sizing thread, r/streetwear

We measured our large at 60.5 cm across the shoulder and 60 cm pit to pit, again in line with the pattern. If your usual tee sits around 50 cm shoulder, expect visible drape in the small of the back and a shoulder seam that lands past your natural shoulder point.

The hem is the second gate

This is where buyer reports genuinely conflict, and our two samples show why. Both shirts measured narrower at the hem than at the chest — the medium came in at 52 cm across the hem against 55 cm pit to pit — so the body tapers slightly into the finished edge rather than flaring. On a medium build that feels deliberate and tidy. On the reviewers who reported that their normal medium was too small at the bottom while an XL was right in the body, this taper plus the 1–3 cm tolerance is the likely explanation. A tee that is generous through the chest and snug at the hem will feel wrong in either direction.

Length is the other half of that argument. At 69 cm collar-to-hem on our medium, this finishes below the hip bone on a 178 cm frame. Buyers who told us they size down once on Rhude tees cite length, not width, and after wearing both samples for a week we understand the instinct: the body is long enough that sizing up adds fabric you will not use.

Mid-length sleeve, longer print

The listing is explicit about sleeve type — mid-length / five-part sleeve, not a standard short sleeve — even though the product description above it calls them short-sleeve crew necks. The tape settles it. Our medium sleeve ran 24 cm from shoulder seam to cuff, landing just above the elbow. Nothing about it is restrictive, and the extra few centimetres are a meaningful part of the streetwear silhouette, so if you are expecting a trim short sleeve cut above the bicep, recalibrate.

Prints across the run vary in coverage. On our black RH236 the lettering sits high on the chest and the ink added no noticeable stiffness through the panel. Heavier geometric or combination prints will cover more surface, and on a 180–250g combed cotton body that extra ink is where any change in hand will show up first.

Fabric hand at the price point

Combed cotton, standard thickness, loose fit, print or dye finish — the listing does not over-promise. The shirt is dense enough to keep its shape through a wash cycle, the collar held its ribbing after five wears, and the print did not craze at the edges when we stretched the panel. Buyers describing Rhude tees generally call them heavyweight for a T-shirt, and this example is heavy for its price category rather than heavy in absolute terms. Availability is listed as in stock, and the discount from $9.20 to $8.36 is roughly nine percent.

Our overall score for the tee as delivered is 4 / 5. Fabric and print warrant a strong mark; the opaque sizing situation, with 45 option codes and no per-size chart, keeps it short of the top.

Choosing between roughly 45 codes

The colour list is long enough that the option code, not the collection name, is what you are actually buying. Apricot, black, white and combination variants share one spec sheet and one pattern, so the fabric decision is settled the moment you pick a size. What changes is print coverage, ink colour and how the graphic reads against a light or dark body — a lettering print that looks crisp on black can look soft on apricot. Decide which body colour you will actually wear, then confirm the code that carries it.